Last10K.com

3D Systems Corp (DDD) SEC Filing 10-Q Quarterly Report for the period ending Thursday, September 30, 2021

SEC Filings

DDD Valuations

Intrinsic Value
Financial Stability
Financial Ratios
Insider Trades
Manager Portfolios
Notifications

DDD Annual Reports

DDD Quarterly Reports

DDD Corporate News

3D Systems Corp

HISTORY TOOLS
CIK: 910638 Ticker: DDD

EXHIBIT 99.1

3D Systems Reports
Second Quarter 2021 Financial Results



ROCK HILL, South Carolina - August 9, 2021
 - 3D Systems Corporation (NYSE:DDD) announced today its financial results for the second quarter ended June 30, 2021.

Second Quarter Financial and Operational Results

•Revenue of $162.6 million reflects double-digit growth on a consecutive-quarter and year-over-year basis
•Adjusted for divestitures, revenue was 11.4% higher than second quarter 2019 reflecting acceleration beyond pre-pandemic performance levels, a key indicator of business strength
•Strong gross margins and operating efficiencies drove significantly improved profitability, with Adjusted EBITDA margin of 12.4%, GAAP loss per share of $0.08 and non-GAAP earnings per share of $0.12
•Financial performance yielded positive operating cash flow of $13.5 million to support ongoing investments for organic growth
•Announced agreements to sell remaining non-core assets, with anticipated completion in Q3. Following close of transactions, cash on the balance sheet is expected to rise from $131.8 million at quarter end to over $500 million with no debt
•Company is well positioned for continued organic growth and profitability, with a strong balance sheet to support strategic investments

Quarter Ended June 30,
(in millions, expect per share data)20212020
Revenue$162.6 $112.8 
Operating loss$(10.1)$(33.9)
Net income (loss)$(9.6)$(38.0)
Net income (loss) per share - basic$(0.08)$(0.33)
Net income (loss) per share - diluted$(0.08)$(0.33)
Non-GAAP measures for year-over-year comparisons (1)
Non-GAAP operating income (loss)$13.8 $(10.8)
Non-GAAP net income (loss)$14.2 $(15.1)
Non-GAAP income (loss) per share - basic$0.12 $(0.13)
Non-GAAP income (loss) per share - diluted$0.12 $(0.13)
Adjusted EBITDA$20.1 $(3.6)
(1) See Appendix for reconciliation of non-GAAP to GAAP measures

Summary Comments on Results

Commenting on the results, President and Chief Executive Officer, Dr. Jeffrey Graves said, “In our second quarter last year we were in the rapidly-tightening grip of the COVID pandemic, with virtually no visibility into the magnitude or duration of the impact on our Company. It was into this tumultuous environment that we launched our four-phase transformation plan: reorganize into Healthcare and Industrial business units, restructure to gain operating efficiencies, divest non-core assets and then invest for the future. Today, after perhaps the most challenging 12 months that any of us has experienced, our world has changed for the better in several ways. Not only is the global economy rebounding, but additive manufacturing is being implemented at an increasing rate in production as companies seek a more capable and flexible supply chain for critical components. Our focus, and our performance over this past year, has validated our core purpose statement: To be leaders in enabling additive manufacturing solutions for applications in growing markets that demand high-reliability products.”

Dr. Graves continued, “Our second quarter performance reflected continued positive momentum, with results that greatly surpassed those of a year ago from both a revenue and profitability perspective. Perhaps even more importantly, we also saw double-digit revenue growth on a consecutive quarter basis, an important indicator of the momentum we are now experiencing. Further evidence of our momentum is our results versus our 2019 pre-COVID second quarter performance. We were pleased to deliver over 11% organic revenue growth against the second quarter 2019 results, which in this case means exclusive of businesses we have divested, along with a dramatic improvement in profitability. From a cash perspective, we again were pleased with our performance in the quarter, having generated $13.5 million in cash from operations. We believe this performance is the result of our exclusive focus on additive manufacturing, bringing together our printers, materials and software technologies to solve specific key customer applications that drive market adoption in both Healthcare and specific Industrial markets such as semiconductors, space systems, and advanced transportation systems.”

Dr. Graves further commented, “From a divestment standpoint, we have announced the sale of both our On-Demand Parts business, which focused on the rapid production of components using a multitude of digital manufacturing methods, and Simbionix, a medical simulation business. We are pleased to confirm that these transactions complete our efforts to exit non-core businesses, enabling our entire focus and investment priority to be on additive manufacturing moving forward. Once completed, we believe the sale of these assets, combined with our cash generation from operations will leave us with a very strong balance sheet, with roughly $500 million in cash and no debt. We believe our consistent performance, and our balance sheet, positions us well for future investment in our core business.”

Dr. Graves summarized, “We are excited about the tremendous progress we have made this past year, reinforcing our foundation in additive manufacturing and positioning ourselves for a very exciting future. From a strategic standpoint, as one of the largest companies in our industry, we have both the scale and the breadth of technologies, encompassing both polymers and metals, that our customers require for their success. We believe the magic for our company, and one that is increasingly evident in our results each quarter, is the intense organizational and operational focus we now have on delivering specific, market-leading customer applications, across both our Healthcare and Industrial businesses. Using this approach, we are successfully bringing together the hardware, materials and software technologies that our customers need for the successful adoption of additive manufacturing. This is translating each quarter into exciting growth and profitability, creating value for all of our stakeholders.”

Summary of Second Quarter Results

Revenue for the second quarter of 2021 increased 44.1% compared to the same period last year and increased 59.3% when excluding businesses divested in 2020 and 2021. Revenue increased 11.3%
compared to last quarter. The results reflect continued strength in Healthcare and an increase in demand from Industrial customers as compared to last quarter. Revenue from Healthcare increased 68.6% to $82.8 million, compared to the same period last year, and increased 14.2% compared to last quarter. This increase from last quarter included double digit growth in medical applications, as well as strong demand for dental materials. Compared to the same period last year, Industrial sales increased 25.3% to $79.7 million, and increased 49.6% when excluding businesses divested in 2020 and 2021. Compared to last quarter, Industrial sales increased 8.3% with solid demand in both products and materials.

Gross profit margin in the second quarter of 2021 was 42.4% compared to 31.2% in the same period last year. Non-GAAP gross profit margin was 42.4% compared to 41.0% in the same period last year. Compared to last quarter, gross profit margin decreased approximately 140 basis points primarily as a result of non-recurring write downs related to equipment and inventory.

Operating expenses increased 14.5% to $79.1 million in the second quarter of 2021, compared to the same period a year ago, primarily as a result of expenses related to stock compensation including bonuses. On a non-GAAP basis, operating expenses were $55.2 million, a 3.3% decrease from the second quarter of the prior year. The lower non-GAAP operating expenses reflect savings achieved from cost restructuring activities, offset by spending in targeted areas to support future growth.

2021 Gross Profit Margin Outlook

Consistent with prior guidance, on a non-GAAP basis the company expects 2021 gross profit margins to be between 40% and 44%.

Financial Liquidity

At June 30, 2021, the company had cash on hand of $131.8 million, no debt and a $100 million unused revolving credit facility with full availability based on the terms of the agreement. Cash has increased $47.8 million since December 31, 2020, driven primarily by net proceeds from divestitures of $54.7 million and cash generated from operations of $42.0 million, partially offset by a debt repayment of $21.4 million, acquisition costs of $14.9 million and other financing and investing uses of cash.

Q2 2021 Conference Call and Webcast

3D Systems expects to file its Quarterly Report on Form 10-Q for the quarter ended June 30, 2021 with the Securities and Exchange Commission today, August 9, 2021. The company will host a conference call and simultaneous webcast to discuss these results tomorrow morning, which may be accessed as follows:

Date: Tuesday, August 10, 2021
Time: 8:30 a.m. Eastern Time
Listen via webcast: www.3dsystems.com/investor
Participate via telephone: 201-689-8345

A replay of the webcast will be available approximately two hours after the live presentation at www.3dsystems.com/investor.


Forward-Looking Statements

Certain statements made in this release that are not statements of historical or current facts are forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. Forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause the actual results, performance or achievements of the company to be materially different from historical
results or from any future results or projections expressed or implied by such forward-looking statements, including the ability to consummate the divestiture of non-core assets as expected. In many cases, forward looking statements can be identified by terms such as “believes,” “belief,” “expects,” “may,” “will,” “estimates,” “intends,” “anticipates” or “plans” or the negative of these terms or other comparable terminology. Forward-looking statements are based upon management’s beliefs, assumptions and current expectations and may include comments as to the company’s beliefs and expectations as to future events and trends affecting its business and are necessarily subject to uncertainties, many of which are outside the control of the company. The factors described under the headings “Forward-Looking Statements” and “Risk Factors” in the company’s periodic filings with the Securities and Exchange Commission, as well as other factors, could cause actual results to differ materially from those reflected or predicted in forward-looking statements. Although management believes that the expectations reflected in the forward-looking statements are reasonable, forward-looking statements are not, and should not be relied upon as a guarantee of future performance or results, nor will they necessarily prove to be accurate indications of the times at which such performance or results will be achieved. The forward-looking statements included are made only as the date of the statement. 3D Systems undertakes no obligation to update or revise any forward-looking statements made by management or on its behalf, whether as a result of future developments, subsequent events or circumstances or otherwise, except as required by law.

Presentation of Information in this Press Release

3D Systems reports is financial results in accordance with GAAP. To facilitate a better understanding of the impact that strategic acquisitions, non-recurring charges and certain non-cash expenses had on its financial results, management reviews certain non-GAAP measures, including non-GAAP revenue, non-GAAP Cost of Sales, non-GAAP Operating Income, non-GAAP Net Income (Loss), non-GAAP Basic and Diluted Income (Loss) per Share, non-GAAP Gross Profit, non-GAAP Gross Profit Margin, non-GAAP SG&A Expenses, non-GAAP R&D, non-GAAP Other Income and Expense and non-GAAP Operating Expenses, each of which exclude the impact of amortization of intangibles, acquisition and severance expenses, stock-based compensation expense, litigation settlements and charges related to strategic decisions and portfolio realignment, and Adjusted EBITDA, defined as non-GAAP Operating Income plus depreciation, and Adjusted EBITDA Margins to better evaluate period-over-period performance. A reconciliation of GAAP to non-GAAP results is provided in the accompanying schedule.

3D Systems does not provide forward-looking guidance on a GAAP basis. The company is unable to provide a quantitative reconciliation of these forward-looking non-GAAP measures to the most directly comparable forward-looking GAAP measures without unreasonable effort because 3D Systems cannot reliably forecast legal, acquisition and divestiture expenses, restructuring expenses, product end of life adjustments and goodwill impairment, which are difficult to predict and estimate. These items are inherently uncertain and depend on various factors, many of which are beyond the company’s control, and as such, any associated estimate and its impact on GAAP performance could vary materially.

About 3D Systems

More than 30 years ago, 3D Systems brought the innovation of 3D printing to the manufacturing industry. Today, as the leading Additive Manufacturing solutions partner, we bring innovation, performance, and reliability to every interaction - empowering our customers to create products and business models never before possible. Thanks to our unique offering of hardware, software, materials and services, each application-specific solution is powered by the expertise of our application engineers who collaborate with customers to transform how they deliver their products and services. 3D Systems’ solutions address a variety of advanced applications in Healthcare and Industrial markets such as Medical and Dental, Aerospace & Defense, Automotive and Durable Goods. More information on the company is available at www.3dsystems.com

Tables Follow

The following information was filed by 3D Systems Corp (DDD) on Tuesday, August 10, 2021 as an 8K 2.02 statement, which is an earnings press release pertaining to results of operations and financial condition. It may be helpful to assess the quality of management by comparing the information in the press release to the information in the accompanying 10-Q Quarterly Report statement of earnings and operation as management may choose to highlight particular information in the press release.

View differences made from one quarter to another to evaluate 3D Systems Corp's financial trajectory

Compare SEC Filings Year-over-Year (YoY) and Quarter-over-Quarter (QoQ)
Sample 10-K Year-over-Year (YoY) Comparison

Compare this 10-Q Quarterly Report to its predecessor by reading our highlights to see what text and tables were  removed  ,   added    and   changed   by 3D Systems Corp.

Continue

Assess how 3D Systems Corp's management team is paid from their Annual Proxy

Definitive Proxy Statement (Form DEF 14A)
Screenshot example of actual Proxy Statement

3D Systems Corp's Definitive Proxy Statement (Form DEF 14A) filed after their 2021 10-K Annual Report includes:

  • Voting Procedures
  • Board Members
  • Executive Team
  • Salaries, Bonuses, Perks
  • Peers / Competitors

Continue

SEC Filing Tools

Rating

Learn More
Bullish Bearish Neutral
Filter Sentiment:
All
Positive
Negative
Filter Category:
All
Financial
Revenue
Other
Filter Subcategory:
All
Earnings
Expense
Product
Cash Flow
Income
Geography
Other
Inside 3D Systems Corp's 10-Q Quarterly Report:

Financial Statements, Disclosures and Schedules

Inside this 10-Q Quarterly Report

Cover Page
Condensed Consolidated Balance Sheets
Condensed Consolidated Balance Sheets (Parenthetical)
Condensed Consolidated Statements Of Cash Flows
Condensed Consolidated Statements Of Cash Flows (Parenthetical)
Condensed Consolidated Statements Of Comprehensive Income (Loss)
Condensed Consolidated Statements Of Operations
Condensed Consolidated Statements Of Stockholders' Equity
Condensed Consolidated Statements Of Stockholders' Equity (Parenthetical)
Accrued And Other Liabilities
Accrued And Other Liabilities (Tables)
Accrued And Other Liabilities - Schedule Of Accrued Liabilities (Details)
Accrued And Other Liabilities - Schedule Of Other Liabilities (Details)
Basis Of Presentation
Basis Of Presentation (Details)
Basis Of Presentation (Policies)
Basis Of Presentation (Tables)
Borrowings
Borrowings (Details)
Commitments And Contingencies
Commitments And Contingencies (Details)
Dispositions And Acquisitions
Dispositions And Acquisitions (Details)
Fair Value Measurements
Fair Value Measurements (Details)
Fair Value Measurements (Tables)
Goodwill And Intangible Assets
Goodwill And Intangible Assets (Tables)
Goodwill And Intangible Assets - Goodwill (Details)
Goodwill And Intangible Assets - Intangible Assets (Details)
Hedging Activities And Financial Instruments
Hedging Activities And Financial Instruments (Details)
Hedging Activities And Financial Instruments (Tables)
Income Taxes
Income Taxes (Details)
Inventories
Inventories (Tables)
Inventories - Components Of Inventories (Details)
Inventories - Narrative (Details)
Leases
Leases (Tables)
Leases - Balance Sheet Classifications (Details)
Leases - Components Of Lease Cost (Details)
Leases - Future Minimum Lease Payments (Details)
Leases - Lease Weighted Average (Details)
Leases - Narrative (Details)
Leases - Supplemental Cash Flows (Details)
Net Income (Loss) Per Share
Net Income (Loss) Per Share (Details)
Net Income (Loss) Per Share (Tables)
Restructuring And Exit Activity Costs
Restructuring And Exit Activity Costs (Tables)
Restructuring And Exit Activity Costs - Narrative (Details)
Restructuring And Exit Activity Costs - Restructuring Cost (Details)
Restructuring And Exit Activity Costs - Restructuring Reserve Activity (Details)
Revenue
Revenue (Details)
Segment Information
Segment Information (Details)
Segment Information (Tables)
Subsequent Events
Subsequent Events (Details)
Ticker: DDD
CIK: 910638
Form Type: 10-Q Quarterly Report
Accession Number: 0000910638-21-000027
Submitted to the SEC: Mon Nov 08 2021 4:31:29 PM EST
Accepted by the SEC: Mon Nov 08 2021
Period: Thursday, September 30, 2021
Industry: Prepackaged Software

External Resources:
Stock Quote
Social Media

Bookmark the Permalink:
https://last10k.com/sec-filings/ddd/0000910638-21-000027.htm