Last10K.com

3D Systems Corp (DDD) SEC Filing 10-Q Quarterly Report for the period ending Wednesday, March 31, 2021

SEC Filings

3D Systems Corp

CIK: 910638 Ticker: DDD

EXHIBIT 99.1

3D Systems Reports
Fourth Quarter and Full Year 2020 Financial Results
(Unaudited), Reschedules Form 10-K Filing



ROCK HILL, South Carolina - March 1, 2021
- 3D Systems Corporation (NYSE:DDD) announced today that it will delay filing its Annual Report on Form 10-K for the fiscal year ended December 31, 2020. The company will file a Form 12b-25, Notification of Late Filing, with the Securities and Exchange Commission, which extends the deadline to file the Form 10-K. The company confirms its plans to hold a fourth quarter and full year 2020 conference call on Tuesday, March 2, 2021.

The company noted the delay in filing is primarily related to the presentation of cash flows associated with the divestiture process for its Cimatron and GibbsCam software businesses. Based on preliminary analysis, the company believes that any financial impact resulting from this review is accounted for within its fourth quarter and full year 2020 results presented below. The delayed filing has no impact on the operations of the company’s business. 3D Systems CEO, Dr. Jeff Graves commented “While we were greatly disappointed that we were not able to conclude the audit in a timely fashion, we are pleased to provide our preliminary financial results for the fourth quarter and full year 2020, and look forward to discussing these results and our progress in positioning 3D Systems for sustained profitable growth on our conference call tomorrow.”

Fourth Quarter Financial and Operational Results (unaudited)

Q4 2020 revenue of $172.7 million, compared to $168.2 million in Q4 2019 and $136.2 million in Q3 2020, representing growth of 2.6% and 26.8%, respectively
Double-digit revenue growth in both Healthcare and Industrial on a consecutive quarter basis
GAAP operating income of $0.7 million and GAAP net loss of $19.8 million
Restructuring and efficiency improvements drove non-GAAP operating income of $16.1 million and adjusted EBITDA margins of 13%

Full Year 2020 and Recent Business Highlights (unaudited)

Full year 2020 revenue of $557.2 million, compared to $636.4 million in FY 2019, impacted by the COVID-19 pandemic primarily in the first half of the year
Introduced and began executing four-stage plan to Reorganize, Restructure, Divest, and Invest
Achieved target of $60M run-rate cost savings in 2020
Achieved significant milestone with regenerative medicine development partner, resulting in milestone payment that will be re-invested in this business
Closed on previously announced sale of non-core software business and paid off outstanding debt

Quarter Ended December 31,Year Ended December 31,
(in millions, expect per share data)2020201920202019
Revenue$172.7 $168.2 $557.2 $636.4 
Operating income (loss)$0.7 $(4.7)$(119.0)$(57.1)
Net loss$(19.8)$(4.7)$(149.6)$(69.6)
Basic and diluted loss per share$(0.16)$(0.04)$(1.27)$(0.61)
Non-GAAP measures for year-over-year comparisons (1)
Non-GAAP operating income$16.1 $5.7 $0.3 $1.2 
Non-GAAP net income (loss)$10.6 $5.5 $(13.1)$(9.6)
Non-GAAP basic and diluted income (loss) per share$0.09 $0.05 $(0.11)$(0.08)
Adjusted EBITDA$22.9 $12.9 $28.7 $31.2 
(1) See Appendix for reconciliation of GAAP and non-GAAP operating income (loss), net income (loss) and basic and diluted income (loss) per share.

Summary Comments

Commenting on the company’s progress in 2020, Dr. Graves said, “With our singular focus on additive manufacturing, we were pleased to deliver strong growth at the end of what was an unprecedented year. The execution of our four-stage plan to deliver increased value to our customers and shareholders, initiated in the summer of 2020, took hold and rapidly gained momentum as we moved through the second half of the year. By the fourth quarter, the results of these efforts in our two focused businesses became very clear. Our Healthcare business delivered exceptional revenue growth of 48% year-over-year, driven strongly by both dental and medical applications, while also making a significant technological breakthrough in our emerging regenerative medicine area, which will be increasingly important to our Healthcare business in the years ahead. We were also very pleased with our Industrial performance during the fourth quarter, which recorded double-digit revenue growth on a consecutive quarter basis, continuing the recovery we have seen in our markets from the effects of the COVID-19 pandemic. Our Industrial business growth reflected broad-based wins, particularly in the metals application areas, pointing to increasing demand for our products in markets like aerospace, automotive, and consumer products.

Dr. Graves continued, “Executing on our plan to drive increased efficiencies, we achieved our target of $60M in run-rate cost savings by the end of 2020. In addition, our divestiture efforts for non-core assets have been an important step in our plans to refocus on our core mission to be the leader in enabling additive manufacturing solutions for applications in growing markets that demand high-reliability products. With proceeds from our initial divestitures and positive cash flow, we will continue to look for opportunities to invest in the business, as evidenced by our recent announcement regarding our expanding regenerative medicine program.”

Dr. Graves summarized, “While 2020 will always be known as a year of great challenges, I am very proud of our efforts to focus the business on the increasingly exciting opportunities we see ahead for additive manufacturing, across both Healthcare and Industrial markets. With the progress we have made over the last year, we can now clearly see a future of exciting growth, expanding applications, and increasing profitability that will allow us to invest for the future, creating true value for our customers, our employees and our shareholders.”

Summary of Fourth Quarter Results (unaudited)

Revenue for the fourth quarter of 2020 increased 2.6% compared to the same period last year and increased 26.8% compared to the third quarter of 2020. The results reflect a continuing rebound in customer activity from the worst of the pandemic-related shutdowns as well as an increasing number of new applications for additive manufacturing technology. Revenue from Healthcare increased 48.0% to $86.6 million, compared to the same period last year, driven by strong sales in both dental applications and medical applications. Industrial sales decreased 21.6% to $86.0 million, compared to the same period last year, as demand, while strengthening, has not yet returned to pre-pandemic levels. Compared to the third quarter of 2020, Healthcare increased 42.4% and Industrial increased 14.2% in the fourth quarter of 2020.

Gross profit margin in the fourth quarter of 2020 was 42.0% compared to 44.1% in the same period last year. Non-GAAP gross profit margin was 42.9% compared to 44.3% in the same period last year.

Operating expenses decreased 9.2% to $71.7 million in the fourth quarter of 2020, compared to the same period a year ago. On a non-GAAP basis, operating expenses were $58.0 million, a 15.8% decrease from the fourth quarter of the prior year. The lower non-GAAP operating expenses reflect savings achieved from cost restructuring activities as well as reduced hiring and lower travel expenses resulting from the coronavirus pandemic.

Summary of Full-Year 2020 Results (unaudited)

Revenue for the full year 2020 decreased 12.4% compared to the prior year, primarily due to the impacts of COVID-19, the effects of which occurred most severely at the onset of the pandemic with a strong return in activity in the latter half of the year. Revenue from Healthcare increased 9.1% to $245.4 million compared to the prior year, driven by stronger sales in both dental and medical applications. Industrial sales decreased 24.2% to $311.9 million compared to the prior year, as demand has not yet returned to pre-pandemic levels.

Gross profit margin for the full year 2020 was 40.1% compared to 44.1% in the prior year. Non-GAAP gross profit margin was 42.6% compared to 44.8% in the prior year. Gross profit margin decreased primarily due to the under absorption of supply chain overhead resulting from lower production, as well as an end-of-life inventory charge of $12.4 million.

Operating expenses for the full year 2020 increased 1.4% to $342.3 million compared to the prior year. On a non-GAAP basis, operating expenses were $236.9 million, a 16.2% decrease from the prior year. The lower non-GAAP operating expenses reflect savings achieved from cost restructuring activities as well as reduced hiring and lower travel expenses resulting from the coronavirus pandemic.

2021 Gross Profit Margin Outlook

On a non-GAAP basis, the company expects 2021 gross profit margins to be between 40% and 44%, taking into account businesses divested in 2020 and early 2021, as well as the impact of the company’s cost savings initiatives.

Financial Liquidity

At December 31, 2020, the company had cash on hand of $84.7 million, including cash in assets held for sale and restricted cash, total debt of $21.4 million and a $100 million unused revolving credit facility with approximately $62.0 million of availability based on the terms of the agreement. During the fourth quarter of 2020, the company did not issue any shares under its at-the-market equity program (“ATM Program”), which, as previously disclosed, has now been terminated.

The company closed on previously announced divestitures and used proceeds to eliminate outstanding debt, leaving its balance sheet in a net-cash position. The strengthened balance sheet and improved cost structure positions the company well to support future growth investments.

Preliminary Audit Results

In the course of preparing its financial results for the fourth quarter and full year 2020, the company discovered certain internal control deficiencies. As a result, the company will report material weaknesses in internal controls in its fiscal 2020 Annual Report on Form 10-K. As of the date of this release, there have been no material misstatements identified in prior year financial statements as a result of these deficiencies, and the company expects to file its 2020 Annual Report on Form 10-K no later than March 16, 2021. Please refer to the upcoming 2020 Annual Report on Form 10-K for more information.

The unaudited financial data above remains subject to audit, review or other procedures by the company’s independent registered public accounting firm. As a result, actual results may differ from the anticipated results shown above.

Q4 and FY 2020 Conference Call and Webcast
The company will host a conference call and simultaneous webcast to discuss these results tomorrow morning, which may be accessed as follows:

Date: Tuesday, March 2, 2021
Time: 8:30 a.m. Eastern Time
Listen via webcast: www.3dsystems.com/investor
Participate via telephone: 201-689-8345

A replay of the webcast will be available approximately two hours after the live presentation at www.3dsystems.com/investor.

Forward-Looking Statements
Certain statements made in this release that are not statements of historical or current facts are forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. Forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause the actual results, performance or achievements of the company to be materially different from historical results or from any future results or projections expressed or implied by such forward-looking statements. In many cases, forward looking statements can be identified by terms such as “believes,” “belief,” “expects,” “may,” “will,” “estimates,” “intends,” “anticipates” or “plans” or the negative of these terms or other comparable terminology. Forward-looking statements are based upon management’s beliefs, assumptions and current expectations and may include comments as to the company’s beliefs and expectations as to future events and trends affecting its business and are necessarily subject to uncertainties, many of which are outside the control of the company. The factors described under the headings “Forward-Looking Statements” and “Risk Factors” in the company’s periodic filings with the Securities and Exchange Commission, as well as other factors, could cause actual results to differ materially from those reflected or predicted in forward-looking statements. Although management believes that the expectations reflected in the forward-looking statements are reasonable, forward-looking statements are not, and should not be relied upon as a guarantee of future performance or results, nor will they necessarily prove to be accurate indications of the times at which such performance or results will be achieved. The forward-looking statements included are made only as the date of the statement. 3D Systems undertakes no obligation to update or revise any forward-looking statements made by management or on its behalf, whether as a result of future developments, subsequent events or circumstances or otherwise.

Presentation of Information in this Press Release
3D Systems reports is financial results in accordance with GAAP. To facilitate a better understanding of the impact that strategic acquisitions, non-recurring charges and certain non-cash expenses had on its financial results, management reviews certain non-GAAP measures, including non-GAAP Operating Income, non-GAAP Net Income (Loss), non-GAAP Basic and Diluted Income (Loss) per Share, non-GAAP Gross Profit, non-GAAP Gross Profit Margin, non-GAAP SG&A Expenses and non-GAAP Operating Expenses, each of which exclude the impact of amortization of intangibles, acquisition and severance expenses, stock-based compensation expense, litigation settlements and charges related to strategic decisions and portfolio realignment, and Adjusted EBITDA, defined as non-GAAP Operating Income plus depreciation, and Adjusted EBITDA Margins to better evaluate period-over-period performance. A reconciliation of GAAP to non-GAAP results is provided in the accompanying schedule.

3D Systems does not provide forward-looking guidance on a GAAP basis. The company is unable to provide a quantitative reconciliation of these forward-looking non-GAAP measures to the most directly comparable forward-looking GAAP measures without unreasonable effort because 3D Systems cannot reliably forecast legal, acquisition and divestiture expenses, restructuring expenses, product end of life adjustments and goodwill impairment, which are difficult to predict and estimate. These items are inherently uncertain and depend on various factors, many of which are beyond the company’s control, and as such, any associated estimate and its impact on GAAP performance could vary materially.

About 3D Systems
More than 30 years ago, 3D Systems brought the innovation of 3D printing to the manufacturing industry. Today, as the leading Additive Manufacturing solutions partner, we bring innovation, performance, and reliability to every interaction - empowering our customers to create products and business models never before possible. Thanks to our unique offering of hardware, software, materials and services, each application-specific solution is powered by the expertise of our application engineers who collaborate with customers to transform how they deliver their products and services. 3D Systems’ solutions address a variety of advanced applications in Healthcare and Industrial markets such as Medical and Dental, Aerospace & Defense, Automotive and Durable Goods. More information on the company is available at www.3dsystems.com

Tables Follow


The following information was filed by 3D Systems Corp (DDD) on Tuesday, March 2, 2021 as an 8K 2.02 statement, which is an earnings press release pertaining to results of operations and financial condition. It may be helpful to assess the quality of management by comparing the information in the press release to the information in the accompanying 10-Q Quarterly Report statement of earnings and operation as management may choose to highlight particular information in the press release.

View differences made from one quarter to another to evaluate 3D Systems Corp's financial trajectory

Compare SEC Filings Year-over-Year (YoY) and Quarter-over-Quarter (QoQ)
Sample 10-K Year-over-Year (YoY) Comparison

Compare this 10-Q Quarterly Report to its predecessor by reading our highlights to see what text and tables were  removed  ,   added    and   changed   by 3D Systems Corp.

Continue

Assess how 3D Systems Corp's management team is paid from their Annual Proxy

Definitive Proxy Statement (Form DEF 14A)
Screenshot example of actual Proxy Statement

3D Systems Corp's Definitive Proxy Statement (Form DEF 14A) filed after their 2021 10-K Annual Report includes:

  • Voting Procedures
  • Board Members
  • Executive Team
  • Salaries, Bonuses, Perks
  • Peers / Competitors

Continue

SEC Filing Tools

Rating

Learn More
Bullish Bearish Neutral
Filter Sentiment:
All
Positive
Negative
Filter Category:
All
Financial
Revenue
Other
Filter Subcategory:
All
Expense
Income
Product
Earnings
Cash Flow
Other
Inside 3D Systems Corp's 10-Q Quarterly Report:

Financial Statements, Disclosures and Schedules

Inside this 10-Q Quarterly Report

Cover Page
Condensed Consolidated Balance Sheets
Condensed Consolidated Balance Sheets (Parenthetical)
Condensed Consolidated Statements Of Cash Flows
Condensed Consolidated Statements Of Cash Flows (Parenthetical)
Condensed Consolidated Statements Of Comprehensive Income (Loss)
Condensed Consolidated Statements Of Operations
Condensed Consolidated Statements Of Stockholders' Equity
Condensed Consolidated Statements Of Stockholders' Equity (Parenthetical)
Accrued And Other Liabilities
Accrued And Other Liabilities (Tables)
Accrued And Other Liabilities - Schedule Of Accrued Liabilities (Details)
Accrued And Other Liabilities - Schedule Of Other Liabilities (Details)
Basis Of Presentation
Basis Of Presentation (Details)
Basis Of Presentation (Policies)
Basis Of Presentation (Tables)
Borrowings
Borrowings (Details)
Commitments And Contingencies
Commitments And Contingencies (Details)
Dispositions
Dispositions (Details)
Fair Value Measurements
Fair Value Measurements (Details)
Fair Value Measurements (Tables)
Hedging Activities And Financial Instruments
Hedging Activities And Financial Instruments (Details)
Hedging Activities And Financial Instruments (Tables)
Income Taxes
Income Taxes (Details)
Intangible Assets
Intangible Assets (Details)
Intangible Assets (Tables)
Inventories
Inventories (Tables)
Inventories - Components Of Inventories (Details)
Inventories - Narrative (Details)
Leases
Leases (Tables)
Leases - Balance Sheet Classifications (Details)
Leases - Components Of Lease Cost (Details)
Leases - Future Minimum Lease Payments (Details)
Leases - Lease Weighted Average (Details)
Leases - Narrative (Details)
Leases - Supplemental Cash Flows (Details)
Net Income (Loss) Per Share
Net Income (Loss) Per Share (Details)
Net Income (Loss) Per Share (Tables)
Restructuring And Exit Activity Costs
Restructuring And Exit Activity Costs (Tables)
Restructuring And Exit Activity Costs - Narrative (Details)
Restructuring And Exit Activity Costs - Restructuring Cost (Details)
Restructuring And Exit Activity Costs - Restructuring Reserve Activity (Details)
Revenue
Revenue (Details)
Segment Information
Segment Information (Details)
Segment Information (Tables)
Subsequent Events

Material Contracts, Statements, Certifications & more

3D Systems Corp provided additional information to their SEC Filing as exhibits

Ticker: DDD
CIK: 910638
Form Type: 10-Q Quarterly Report
Accession Number: 0000910638-21-000013
Submitted to the SEC: Mon May 10 2021 4:36:32 PM EST
Accepted by the SEC: Mon May 10 2021
Period: Wednesday, March 31, 2021
Industry: Prepackaged Software

External Resources:
Stock Quote
Social Media

Bookmark the Permalink:
https://last10k.com/sec-filings/ddd/0000910638-21-000013.htm